Solutions

Repairing in underwater conditions
Banner

Masters Club discusses special epoxies which may be effectively applied even on wet or submerged surfaces and are ideal for sealing cement cracks in swimming pools, fixing lamps and planks and for the quick repair of surfboards.

Wish you a useful and interesting viewing and active discussion in the comments section!

fastfixaqua_bw

Browse all solutions
Ahti

Created by:

Ahti

Products you'll need

Faq

Q: Where are the FastFix products used?
A: Can be used for a vast range of applications and both by professionals and home improvers. FastFix helps in all repair and renovation works both indoors and outdoors. It is a very fast solution for fast emergency repairs and the compound can be used for gluing various surfaces.
Q: How quickly does the putty dry?
A: Working time 5-30 minutes, depending on the product; final hardening in 60-180 minutes.
Q: How to FastFix?
A: Cut a suitable piece from the small bar, bind the components between wet fingers. When the materials have mixed, form the shape you need and use it. When applying the putty to a moist, wet or slowly leaking surface, using some force press the material against the surface and keep pressing it until it has stuck. Remove any excessive material before it cures. You can paint, stain, sand, cut and saw the material.
  • Where are the FastFix products used?
    Q: Where are the FastFix products used?
    A: Can be used for a vast range of applications and both by professionals and home improvers. FastFix helps in all repair and renovation works both indoors and outdoors. It is a very fast solution for fast emergency repairs and the compound can be used for gluing various surfaces.
  • How quickly does the putty dry?
    Q: How quickly does the putty dry?
    A: Working time 5-30 minutes, depending on the product; final hardening in 60-180 minutes.
  • How to FastFix?
    Q: How to FastFix?
    A: Cut a suitable piece from the small bar, bind the components between wet fingers. When the materials have mixed, form the shape you need and use it. When applying the putty to a moist, wet or slowly leaking surface, using some force press the material against the surface and keep pressing it until it has stuck. Remove any excessive material before it cures. You can paint, stain, sand, cut and saw the material.

Could not find an answer?

Related solutions

YOUR OPINION IS VALUABLE TO US

We aim to create better products which last longer and provide quality service, therefor we look forward to your questions, opinions and proposals.

Please fill in all required fields.
Thank you for your feedback!