All solutions

TAGS
  • Thermal insulation using foam adhesive and insulating plates

    An affordable, convenient and quick way to insulate the walls of a garage, house or shed using insulation boards and a special polyurethane adhesive.

    Polyurethane adhesive has good bonding and sealing properties. It is easily bonded with various building materials (all kinds of metal, wooden and stone surfaces as well as plastered, painted or varnished surfaces), except Teflon, polyethylene and silicone surfaces.

    The resulting adhesive joint is strong but sufficiently elastic.Wish you a useful and interesting viewing and active discussion in the comments section!

  • How to make a chalkboard

    Nowadays, chalkboards are irreplaceable interior design elements. In this video, we will show how to make a chalkboard from start to finish.
  • Using stone adhesive for laying bricks

    This short video will show you how to use stone adhesive to build non-load bearing partitions. Penosil Premium StoneFix 827 stone glue will be used for that purpose.

    Penosil Premium StoneFix 827 is developed for bonding various stone materials, such as stone blocks, lightweight concrete, concrete, foam concrete, limestone and ceramic bricks.Compared to standard grout, stone adhesive will allow you to lay more lines of blocks/bricks, as the glue will cure fast.

    Strong bonding will be achieved in a period as short as 30 minutes, provided that suitable temperature and air humidity conditions are ensured.

  • How to install a mirror

    Mirror is an irreplaceable part of any home. The following video shows how to fix a mirror on a wall and which tools are required for the task.

    The clip shows the use of a contact synthetic rubber adhesive for this purpose.
    When the solvent has evaporated, the adhesive hardens to form a robust, firm and elastic waterproof bond.

  • How to repair wooden furniture

    Masters Club shows a video on how to repair wooden furniture using Penosil Premium WoodFix.
  • Curtain rod installation with ultra strong adhesive

    In this video, we will install Roman curtains with the super-strong adhesive Penosil Premium StrongFix 707.
  • Carpet installation

    Make sure that you have all necessary tools and protective gear on hand before you begin: a large adhesive comb (4–6 mm between the teeth) to apply adhesive to larger surfaces and a small one (2 mm between the teeth) to apply adhesive to corners and hard-to-reach surfaces, a roller to even out bumps, and knee pads to ensure smooth progress of the work and reduce muscle fatigue while working.A suitable adhesive for installing carpeting is Penosil Premium Floor&Wall UniversalFix 619, which is also suitable for underfloor heating.Clean the surface with a vacuum cleaner.Mix the adhesive well before using it.Pour or apply adhesive to the surface and use an adhesive comb, if necessary. Do not use more adhesive than is necessary for installing carpeting.Move in the direction of your exit to avoid later applying adhesive while standing on carpeting.Apply adhesive evenly across the full width of the room, working in sections. Do not forget to apply adhesive to edges, corners and curved surfaces as well.Then, install pre-measured and pre-cut carpeting.Place carpeting on the floor with pre-applied adhesive and make sure that carpeting runs evenly along walls.Carefully smooth out carpeting to remove air bubbles and ensure that adhesive is in good contact with it. For best results, use a specially designed roller to install carpeting. Make sure that the full surface of the carpeting is in good contact with adhesive.When installing carpeting consisting of several sheets, press edges firmly together and use a roller. This helps to hide carpet seams and adds to their durability.Start with the next floor section, following the above steps.Repeat these steps until carpeting is installed on the entire floor.
 

YOUR OPINION IS VALUABLE TO US

We aim to create better products which last longer and provide quality service, therefor we look forward to your questions, opinions and proposals.

Please fill in all required fields.
Thank you for your feedback!