All solutions

TAGS
  • Thermal insulation using foam adhesive and insulating plates

    An affordable, convenient and quick way to insulate the walls of a garage, house or shed using insulation boards and a special polyurethane adhesive.

    Polyurethane adhesive has good bonding and sealing properties. It is easily bonded with various building materials (all kinds of metal, wooden and stone surfaces as well as plastered, painted or varnished surfaces), except Teflon, polyethylene and silicone surfaces.

    The resulting adhesive joint is strong but sufficiently elastic.Wish you a useful and interesting viewing and active discussion in the comments section!

  • How to make a chalkboard

    Nowadays, chalkboards are irreplaceable interior design elements. In this video, we will show how to make a chalkboard from start to finish.
  • How to use a gunfoam

    Many have asked us questions about correct application of the gunfoam. Masters Club decided to film a special video and give you correct insight on working with the gunfoam.

  • How to renovate an old bathtub

    Many of us are familiar with old and rusted bath tubs. The question is – are they repairable? Is it possible to get rid of disgusting rust or the only solution is to replace an old tub?

    In this video the Masters Club applies a two part epoxy coating kit for the renovation and painting of cast iron bath tubs. We will discuss the required tools, the importance of preparation work and priming and show the proper way to paint the surface of a tub.

  • How to Build Your Own Fish Tank

    This manual will teach you how to make a strong and robust aquarium by yourself in a short time. Where to start, which tools will be needed, how to work with masking tape and which silicone sealant to choose.

    This solution is primarily intended for aquariums with the maximum height of 1000 mm. The manual describes the use of a special silicone sealant for the making of aquariums, sealing of swimming pools, water parks, terrariums and other glass assemblies.

  • How to install a window

    The objective of this manual is to show a proper way to install windows and highlight certain nuances of the installation process. Why use a self-expanding sealant tape to fill the gap between the wall and the window?

    How and where attach the sealant?

    How to fix a window frame?These and many other useful tips on working with foam sealants are offered in the manual. Wish you a useful and interesting viewing and active discussion in the comments section.  

  • Using stone adhesive for laying bricks

    This short video will show you how to use stone adhesive to build non-load bearing partitions. Penosil Premium StoneFix 827 stone glue will be used for that purpose.

    Penosil Premium StoneFix 827 is developed for bonding various stone materials, such as stone blocks, lightweight concrete, concrete, foam concrete, limestone and ceramic bricks.Compared to standard grout, stone adhesive will allow you to lay more lines of blocks/bricks, as the glue will cure fast.

    Strong bonding will be achieved in a period as short as 30 minutes, provided that suitable temperature and air humidity conditions are ensured.

  • Installation of log house windows with self-expanding tape

    Years ago, foam replaced hard material that was used for the installation of windows as a protection from wind and cold. Today, a new comfortable and efficient product has been introduced – self-expanding sealing tape.

    It is a special elastic polyurethane sealant with open pores, impregnated with a sealing solution. Thanks to its density and elasticity, it protects windows from wind, rain and external air movements. The sealing tape is also fireproof. Areas of application In addition to the installation of windows and sealing of log houses, the sealing tape is also suitable for:

    • sealing the panel joints and ventilation systems of big residential houses made from precast concrete slabs,
    • noise and vibration insulation around ventilation and air exchange devices and in the automotive industry;
    • between roof elements and for other sealing works.
  • How to remove old caulk and apply silicone to kitchen joints

    Often, joints between cupboards and walls in the kitchen can be damaged or get covered with dirt, thereby losing their original appearance. The only way to restore joints is to completely remove old silicone. Following solution shows how to remove old caulk and apply new silicone to kitchen joints.
  • Renewing bathroom joints

    This Masters Club video will show you how to renew bathroom joints.

    For example, bad ventilation causes mould in the silicone in bathroom joints. Such silicone cannot be cleaned and the only way to renew the joint is to completely remove the old silicone and fill in the joint with new silicone.

    Old silicone should be removed very carefully and the joint completely cleaned from residues in order to make the fresh silicone adhere well to join surface.

  • How to install a mirror

    Mirror is an irreplaceable part of any home. The following video shows how to fix a mirror on a wall and which tools are required for the task.

    The clip shows the use of a contact synthetic rubber adhesive for this purpose.
    When the solvent has evaporated, the adhesive hardens to form a robust, firm and elastic waterproof bond.

  • Vapour and wind barrier tape installation system

    In order to improve energy efficiency, we suggest using vapour and wind barrier tapes when sealing the joints to improve thermal conductivity and air density.The system consists of Penosil Premium Sealing Tape Internal (vapour barrier) and External (wind barrier), one of the high quality Penosil PU foams and adhesive Penosil Nail & Fix Universal.
  • How to Install Parquet Flooring

    Following video introduces new parguet adhesive and demonstrates parquet flooring techniques.
  • How to use PU foam to seal exterior doors during their installation

    In this video, we use fire-resistant PU foam Penosil Premium FireRated Gunfoam B1 to install the exterior door.Always install the door according to the construction design, relevant requirements and producer’s instructions. Installation methods may vary, depending on the specific door design. Exterior doors are exposed to weather conditions and proper installation ensures their long-term functionality.
 

YOUR OPINION IS VALUABLE TO US

We aim to create better products which last longer and provide quality service, therefor we look forward to your questions, opinions and proposals.

Please fill in all required fields.
Thank you for your feedback!