PENOSIL Premium Cleaning Wipes

Cleaning wipes. Impregnated wipes that effectively remove foam, silicone, paint, glue, oil and other kinds of stains.

To view the technical datasheet and more information on this product and click here

PENOSIL Premium Cleaning Wipes

Solutions with this product

  • Using stone adhesive for laying bricks

    This short video will show you how to use stone adhesive to build non-load bearing partitions. Penosil Premium StoneFix 827 stone glue will be used for that purpose.

    Penosil Premium StoneFix 827 is developed for bonding various stone materials, such as stone blocks, lightweight concrete, concrete, foam concrete, limestone and ceramic bricks.Compared to standard grout, stone adhesive will allow you to lay more lines of blocks/bricks, as the glue will cure fast.

    Strong bonding will be achieved in a period as short as 30 minutes, provided that suitable temperature and air humidity conditions are ensured.

  • How to remove old caulk and apply silicone to kitchen joints

    Often, joints between cupboards and walls in the kitchen can be damaged or get covered with dirt, thereby losing their original appearance. The only way to restore joints is to completely remove old silicone. Following solution shows how to remove old caulk and apply new silicone to kitchen joints.
  • Renewing bathroom joints

    This Masters Club video will show you how to renew bathroom joints.

    For example, bad ventilation causes mould in the silicone in bathroom joints. Such silicone cannot be cleaned and the only way to renew the joint is to completely remove the old silicone and fill in the joint with new silicone.

    Old silicone should be removed very carefully and the joint completely cleaned from residues in order to make the fresh silicone adhere well to join surface.

  • Planting box for home gardeners

    Nowadays when the world is moving towards a ‘greener’ mindset, more and more people have started growing both decorative as well as edible plants on their balconies, windowsills and terraces.

    An original and handy way to use the planting boxes that match your needs is to make them yourself. The cement boards used for covering the façades of buildings are among the materials that can be easily used for making weatherproof, good-looking and practical planting pots that are resistant to moisture, rain, snow and UV-rays, which makes these boxes a long-lasting option.

    However, you should contact the manufacturer or resellers of the boards to get help with cutting out the pieces needed for the sides and bottom of the planting boxes in the correct dimensions.

  • How to use a gunfoam

    Many have asked us questions about correct application of the gunfoam. Masters Club decided to film a special video and give you correct insight on working with the gunfoam.

  • Covering the joints between walls

    Masters Club decided to separate a kitchenette from an office by a partition.

    Having installed the partition, we discovered unsightly large seams between the new and the old wall. This video solution will show how to fill such seams and which materials to use.

  • Socle insulation

    The problem of ground floor’s finishing usually involves two aspects. First, the desirability of an aesthetic view. The second, and more rational reason, is, naturally, the protection of a house from humidity and temperature variations. This manual demonstrates that anyone may finish a ground floor. It is simple because EPS boards (foamed polystyrene) are installed using a foam adhesive and boards are installed over the insulation using the same method.  Wish you a useful and interesting viewing and active discussion in the comments section! Read more about ground floor’s insulation:
  • How to renovate an old bathtub

    Many of us are familiar with old and rusted bath tubs. The question is – are they repairable? Is it possible to get rid of disgusting rust or the only solution is to replace an old tub?

    In this video the Masters Club applies a two part epoxy coating kit for the renovation and painting of cast iron bath tubs. We will discuss the required tools, the importance of preparation work and priming and show the proper way to paint the surface of a tub.

  • Filling a wall crack with acrylic

    A single component acrylic sealant is used to fill joints and gaps, repair small surface defects before painting and seal window and door frames.

    This manual shows the use of an acrylic sealant for the sealing of wall cracks.Are there alternative solutions to this problem? What other uses an acrylic sealant may be put to?

  • Thermal insulation using foam adhesive and insulating plates

    An affordable, convenient and quick way to insulate the walls of a garage, house or shed using insulation boards and a special polyurethane adhesive.

    Polyurethane adhesive has good bonding and sealing properties. It is easily bonded with various building materials (all kinds of metal, wooden and stone surfaces as well as plastered, painted or varnished surfaces), except Teflon, polyethylene and silicone surfaces.

    The resulting adhesive joint is strong but sufficiently elastic.Wish you a useful and interesting viewing and active discussion in the comments section!


We aim to create better products which last longer and provide quality service, therefor we look forward to your questions, opinions and proposals.

Please fill in all required fields.
Thank you for your feedback!